UKR
RU
SK
Lubricants for plastic paving slab molds make it possible to produce high-quality tile products. A good lubricant guarantees easy extraction of the finished product from the mold, during which its appearance will not be damaged. In addition, the front side is not covered with pores.
In our store's catalog, you can choose lubricant for plastic molds depending on the composition used in manufacturing.
Why Should You Use Lubricants for Plastic Molds?
Silicone lubricants for plastic molds are applied shortly before pouring. This is an indispensable device, thanks to which the manufacturing process of tile products has become more convenient and streamlined.
Lubrication of ABS plastic molds has the following features:
- due to preliminary mixing with water, a time-stable emulsion is formed;
- has an affordable cost and is profitable due to sales in large volumes;
- is economically consumed, so it can be used for a long time;
- can be used for various surfaces – metal, plywood, plastic, polymer;
- adheres reliably to the mold, allowing all technological operations to be performed;
- helps ensure uninterrupted production;
- eliminates the risk of products sticking to the molds;
- does not harm the appearance of the tiles;
- the components in the composition are safe for human health and do not require additional protection.
An ordinary sponge is used to apply the composition. As a rule, there is no serious contamination on the molds, so they do not need additional preparation.
Before lubricating the tile molds, the lubricant must be prepared for use. Preparing the lubricating solution is a fairly simple process that does not require special skills or additional costs.
Specialist Recommendations for Proper Lubrication
Lubricant for plastic molds has characteristic features, so for the best effect from its use, it is recommended to read the basic recommendations from specialists. Before starting work, it is necessary to check the molds for contamination and get rid of it. Debris can become an obstacle to the effectiveness of the lubricant.
Lubricant for plastic molds is applied immediately before their use, forming a thin layer of the composition. Brushes, sponges, or sprayers are used – this depends on the composition of the lubricants and your convenience. It is recommended to protect the skin of your hands using ordinary construction gloves.
To achieve an ideal result, follow these rules:
- lubrication of tile molds is carried out without gaps;
- brush bristles must not get into the mold;
- hydrochloric acid is best used for cleaning molds.
If you don't have a special composition on hand, you can prepare a soap solution. In addition to it, dishwashing liquid will do. Various components are used for the density of the tile material itself. We offer to purchase high-quality concrete additives in Ukraine.
As a result, you will be able to easily remove products, clean molds, and extend the service life of the manufactured products.
03/07/2021
