Ensuring durability and ease of removal in the production of concrete products using plastic mould lubricant

In the concrete production process, the use of plastic moulds has become an integral part of the work. However, to ensure long mould life and ease of product removal, the selection and application of lubricants must be properly managed. Stroytechnik, specialising in the manufacture of ABS plastic moulds for concrete products, offers solutions to help optimise this process.

Why do I need grease for plastic moulds?

Lubricant for plastic moulds plays a crucial role in the concrete production process. It is designed to reduce friction between the mould surface and the concrete, which facilitates removal of the products and prevents damage to the mould. Without the proper use of lubricant, product removal can become difficult and the moulds can wear out quickly, negatively impacting the production efficiency and financial health of the company.

How to choose the right lubricant?

There are several key points to consider when selecting a lubricant for plastic moulds. Firstly, the lubricant must be compatible with the mould material and concrete so as not to cause corrosion or other damage. Secondly, it is important to pay attention to its resistance to high temperatures and pressure, especially when working with hot concrete. Finally, the lubricant should be easy to apply and evenly distributed over the entire surface of the mould.

What is the correct way to apply the lubricant?

The effective use of grease involves several steps. First, the mould must be thoroughly cleaned of concrete residues and dust to ensure good contact between the lubricant and the surface. The grease is then applied with a brush or sprayer, spreading it evenly over the entire inner surface of the mould. It is important not to apply too much grease to avoid unnecessary costs and possible problems with excess grease on the products.

Advantages of using quality grease from Stroytechnik Company

Stroytechnik offers a wide range of specialised lubricants designed specifically for use in concrete production. Our products are highly resistant to aggressive media and provide reliable protection of moulds against wear and damage. Thanks to the innovative formulations of our lubricants, the extraction process becomes more efficient and economical.

Lubricant is an integral part of the concrete production process. It not only facilitates the removal of products from the mould, but also protects the plastic surface from wear and damage. Careful selection and application of plastic mould lubricant in concrete production plays a key role in ensuring long mould life and easy product removal. Stroytechnik offers time-tested solutions to help you optimise your production processes and increase the efficiency of your plant.