Manufacturing of parking hemispheres using ABS moulds

Manufacturing of parking hemispheres is an important part of landscaping. These elements help to control traffic flow, ensure safety and create an aesthetically pleasing appearance. ABS plastic moulds are often used for the production of parking hemispheres, which are characterised by strength and durability.

Advantages of ABS moulds

ABS plastic (acrylonitrile butadiene styrene) is one of the most popular materials for concrete moulds. Its advantages include:

1. Strong and durable: ABS moulds can withstand repeated use without loss of quality.
2. Lightweight: they are lighter than metal moulds, making them easier to transport and use.
3. Smooth surface: ensures high surface quality of the finished product.
4. Chemical resistance: ABS plastic moulds do not corrode or react with concrete.

Preparation for manufacturing

Before starting the process of making parking hemispheres, it is necessary to prepare all the necessary materials and equipment:

1. ABS moulds: make sure the moulds are clean and in good condition.
2. Concrete: concrete of a certain composition and consistency is used to make the hemispheres.
3. Reinforcement: reinforcement must be installed inside the hemispheres to increase the strength of the product.
4. Grease for moulds: used to prevent concrete from sticking to the mould.

Manufacturing process

Clean the ABS moulds and apply mould lubricant. This will ensure easy removal of the finished product and keep the mould in good condition.

Install reinforcement inside the mould. This can be a metal mesh or rods, which will ensure the strength and durability of the finished hemisphere.

Prepare the concrete mix and carefully pour it into the mould. Make sure that the concrete is evenly distributed and fills all voids.

Use a vibrating table or vibrator to remove air bubbles from the concrete. This is necessary to achieve a high density and strength of the product.

Leave the concrete in the mould to cure. The drying time depends on the environmental conditions and the composition of the concrete, it usually takes several days.

Once fully cured, carefully remove the hemisphere from the mould. ABS plastic allows you to do this without damaging the finished product.

Tips and advice

• Use quality materials: the durability and strength of the finished product depends on the quality of concrete and reinforcement.
• Observe the drying conditions: optimal drying conditions (temperature and humidity) will help to avoid cracks and deformations.
• Perform regular maintenance of the moulds: regular cleaning and lubrication of ABS moulds will prolong their service life and ensure high surface quality of the products.

Manufacturing parking hemispheres using ABS moulds is an efficient and reliable way to create quality concrete products. "Stroytechnik" offers a wide range of moulds and equipment that will help you to cope with this task at a high level. By following our recommendations and using quality materials, you will be able to produce durable and aesthetically pleasing parking hemispheres.